FD-210
Floor
FD-210 Model is a floor-style temperature-only environmental test chamber.
STRUCTURE. The internal workspace is lined with type 304 stainless steel for a vapor-tight internal construction. The exterior has a durable powder-coat finish over heavy-gauge steel for a long-lasting clean look. Between the two layers is highly-efficient, low k-factor, thermal insulation. This chamber is built to last for many years.
CIRCULATION SYSTEM. Air circulation is crucial for environmental testing. The FD-210 Test Chamber has a proprietary baffle and fan design combination. This optimizes temperature conditions within the workspace.
HEATING SYSTEM. FD test chambers feature heating systems equipped with open ceramic-core nichrome heaters for reliable and accurate temperature control within ±0.5°C.
COOLING SYSTEM. The cooling system in the FD-210 consists of a self-contained mechanical refrigeration system with a cascade configuration, and an air-cooling condenser. An optional water cooling-condenser is available.
Add boost cooling with liquid LN2 or CO2 for even faster pull-down rates. It's a great option for stress tests that require rapid cooling. Even without boost cooling, AES’ standard cascade refrigeration systems have the fastest standard change rates of any environmental test chamber manufacturer. See Basic Specifications tab below.
INSTRUMENTATION. FD Series Test Chambers have incorporated the AESONE CONNECT creating a robust connected device for a standard and uniform interface making operation easier. Learn more in the Instrumentation Tab below.
ALTERNATIVE TEMPERATURE RANGES:
- FD-510 -40°C to +180°C (-40°F to +356°F)
- Specifications
- Standard Features
- Instrumentation
- Safety Features
- Optional Features
- Downloads
Specifications
FD Series
| Interior: | 24W x 27D x 28H (in) |
| 609.5W x 685.8D x 711.1H (mm) | |
| Exterior: | 33.7W x 46.1D x 74.9H (in) |
| 856W x 1171D x 1902.5H (mm) | |
| Volume: | 10.5 cubic ft |
| 297.32 liters | |
| Temperature: | -70°C to 180°C (-94°F to 356°F) |
| Rise Rate*: | 4.5°C/min |
| Pull Down Rate*: | 2°C/min |
| Electrical Supply: | 208 VAC, 1 PH, 60 HZ |
| Full Load Amps: | 26 A |
| Facility Power Receptacle: |
NEMA L6-30
|
| Refrigeration System: | Cascade |
| Mobility: | Will fit through 36 in doorway |
| Approximate Product Weight: | 710 lbs (322 kg) without added options |
| Approximate Shipping Weight: | 820 lbs (372 kg) without added options |
*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.
*Ideal ambient temperature conditions for test chambers is 23°C (73.4°F). The temperature and humidity range of assured performance is between 15°C and 25°C (59°F/77°F) and 30-50% relative humidity. Conditions outside this range may affect the performance of your test chamber and reduce the lifespan of the equipment.
Standard Features
STANDARD FEATURES
- Temperature range -70°C to +180°C (-94°F to +356°F)
- Exterior structure is heavy gauge, cold-rolled steel with powder coat bone color and matte finish
- Interior cabinet: stainless steel, type 304
- Interior light with exterior switch on cabinet face and operable on AESONE CONNECT
- Port configuration: right wall access port and plug with 3in (76.2mm) diameter
- Port configuration: left wall access port and plug with 3in (76.2mm) diameter
- Fully adjustable shelf, 1 wire-grid shelf, stainless steel
- Forced air circulation
- Multipane 12 in x 12 in heated viewing window
- Full opening door with adjustable manual latch
- Locking Swivel Casters, set of 4
Instrumentation
STANDARD INSTRUMENTATION
CONTROLLER 
FD Series Test Chambers have incorporated AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.
AESONE XCHANGE is hardware internal to the chamber that increases your functionality
- Connects the test chamber controller to your network for increased accessibility
- On-board multi-year data logging
AESONE SOFTWARE gives you the power to
- Remote chamber operation and monitoring,
- Web-based test profile creation,
- Viewing current data and historical data visually
- Secure multi-level user access
ADDITIONAL ONBOARD INSTRUMENTATION
WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options
SENSORS.
- TEMPERATURE SENSOR. Measured at the point of airflow entering the workspace. Class A, 3-wire, 100 Ohm Platinum RTD sensor
OPTIONAL DATA LOGGERS. View additional data loggers
Safety Features
STANDARD SAFETY FEATURES
- HIGH/LOW TEMPERATURE CONTROL. An adjustable temperature limit controller allows you to program the highest and lowest temperature of the device under test, protecting products from compromising temperature exposure.
- Refrigeration System Over Pressure Safety Circuit
- Over Temperature Heat Fusing
- TUV Rheinland certified meeting UL 61010-1, US, C, E
Optional Features
- Shelf Modification
- Custom Porting Sizes
- Custom window size
- Noise Reduction Package
- LN2 Boost Cool
- CO2 Boost Cool
- Desiccant Air Dryer to ensure conditions as low as 5% RH
- Dry Nitrogen Purge to keep condensation and frost from accumulating on DUT surfaces at cold temperatures and to prevent oxidation of metals surfaces at high temperatures
Downloads
Please Try Again.