HD-213

HD-213

Floor

HD-213 Model is a floor-style environmental test chamber with temperature and humidity functionality.

STRUCTURE. The internal workspace is lined with type 304 stainless steel for a vapor-tight internal construction . The exterior has a durable powder-coat finish over heavy-gauge steel for a long-lasting clean look. Between the two layers is highly-efficient, low k-factor, thermal insulation. This chamber is built to last for many years.

CIRCULATION SYSTEM. Air circulation is crucial for environmental testing. The HD-213 Test Chamber has a proprietary baffle and fan design combination. This optimizes temperature and humidity conditions within the workspace.

HEATING SYSTEM. HD test chambers feature heating systems equipped with open ceramic-core nichrome heaters for reliable and accurate temperature control within ±0.5°C.

HUMIDITY SYSTEM. The humidity system has a standard range between 10% and 95%. To extend your humidity range, see the optional features section. View RH Chart.

COOLING SYSTEM. The cooling system in the HD-213 consists of a self-contained mechanical refrigeration system with a cascade configuration, and an air-cooling condenser. An optional water cooling-condenser is available.

Add boost cooling with liquid LN2 or CO2 for even faster pull-down rates. It's a great option for stress tests that require rapid cooling. Even without boost cooling, AES standard cascade refrigeration systems have the fastest standard change rates of any environmental test chamber manufacturer. See Basic Specifications tab below.

INSTRUMENTATION. HD Series Test Chambers have incorporated the AESONE CONNECT creating a robust connected device for a standard and uniform interface making operation easier. Learn more in the Instrumentation Tab below.

ALTERNATIVE TEMPERATURE RANGES:

HD-513 -37°C to +180°C (-34.6°F to +356°F)

Specifications
Standard Features
Instrumentation
Safety Features
Optional Features
Downloads
Videos
Dew Point Calculator

Specifications

HD Series

Height: 72" (6' tall)

HD-202 HD-502

Height: 63.5"
Volume: 2.046 cu. ft.

HD-208 HD-508

Height: 67.5"
Volume: 8 cu. ft.

HD-210 HD-510

Height: 75"
Volume: 10.5 cu. ft.

HD-213 HD-513

Height: 71.5"
Volume: 12.703 cu. ft.

Interior:	28W x 28D x 28H (in)
	711.1W x 711.1D x 711.1H (mm)
Exterior:	37.7W x 48.7D x 74.7H (in)
	957.6W x 1237D x 1897.4H (mm)
Volume:	12.7 cubic ft
	359.62 liters
Temperature:	-70°C to 180°C (-94°F to 356°F)
Humidity:	10-95% RH, limited by +4°C Td (for 98% add option)
Humidity Fluctuation:	±2% RH at sensor
*Rise Rate:**	5°C/min
*Pull Down Rate:**	3°C/min
Electrical Supply:	208 VAC, 3 PH, 60 HZ
Full Load Amps:	44 A
Facility Power Receptacle:	Hardwired
Refrigeration System:	Cascade
Mobility:	Will fit through 48 in doorway
Approximate Product Weight:	940 lbs (426 kg) without added options
Approximate Shipping Weight:	1065 lbs (483 kg) without added options

*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.

*Ideal ambient temperature conditions for test chambers is 23°C (73.4°F). The temperature and humidity range of assured performance is between 15°C and 25°C (59°F/77°F) and 30-50% relative humidity. Conditions outside this range may affect the performance of your test chamber and reduce the lifespan of the equipment.

Standard Features

STANDARD FEATURES

Temperature range: -70°C to 180°C (-94°F to +356°F)
Exterior structure is heavy gauge, cold-rolled steel with powder coat bone color and matte finish
Interior cabinet: stainless steel, type 304
Interior light with exterior switch on cabinet face and operable on AESONE CONNECT
Port configuration: right wall access port and plug with 3in (76.2mm) diameter
Port configuration: left wall access port and plug with 3in (76.2mm) diameter
Fully adjustable shelf, 1 wire-grid shelf, stainless steel
Forced air circulation
Gas purge control compatible with desiccant air dryer and GN2
Multipane 12 in x 12 in heated viewing window
Full opening door with adjustable manual latch
Swivel brake casters

Instrumentation

STANDARD INSTRUMENTATION

CONTROLLER

HD Series Test Chambers have upgraded to include AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.

AESONE XCHANGE is hardware internal to the chamber that increases your functionality

Connects the test chamber controller to your network for increased accessibility
On-board multi-year data logging

AESONE SOFTWARE gives you the power to

Remote chamber operation and monitoring,
Web-based test profile creation,
Viewing current data and historical data visually
Secure multi-level user access

ADDITIONAL ONBOARD INSTRUMENTATION

WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options

SENSORS.

TEMPERATURE SENSOR. Measured at the point of airflow entering the workspace. Class A, 3-wire, 100 Ohm Platinum RTD sensor
RELATIVE HUMIDITY SENSOR. Measured at the point of airflow entering the workspace. Speed of airflow does not affect measurement. Sensor is highly accurate between 10-95% RH, over the entire temperature operating range of -70°C to +180°C (-94°F to +356°F)
Solid-State Humidity Sensor
View sensor options

OPTIONAL DATA LOGGERS. View additional data loggers

Safety Features

STANDARD SAFETY FEATURES

HIGH/LOW TEMPERATURE CONTROL. An adjustable temperature limit controller allows you to program the highest and lowest temperature of the device under test, protecting products from compromising temperature exposure.
Over Temperature Heat Fusing
Refrigeration system over-pressure safety circuit
Low-water steam generator over-temperature circuit
TUV Rheinland certified meeting UL 61010-1, US, C, E